Reverb
Reverb
EQP-1A3
Not a Clone, Not an Emulation, This is a Real Pultec EQ!
국내정식수입품입니다
The Pultec EQP-1A3 two-band equalizer, the modern-day version of the legendary EQP-1A equalizer, can give your tracks the massive bass, silky highs, and addictive warmth that made the original a studio standard. Pulse Techniques is back, building their classic EQs right here in the USA, without compromise or “enhancement” to the original designs. New Pultecs like the EQP-1A3 contain only original-spec components and are dead ringers for their vintage ancestors. It may sound like magic but it’s been time-tested and proven – the Pultec EQP-1A3 equalizer can make any track sound better.
Pultec EQP-1A3 Two-band Equalizer at a Glance
Thank Pultec for decades of amazing recordings
Magical tools revered for their ability to improve the sound of audio simply by passing signal through them, Pultec equalizers like the EQP-1A3 are the stuff of legend. You’ve heard them on countless hits. Rare vintage units cost a pretty penny – if you can find one in good working order. So naturally, there have been many hardware and software “re-creations” over the years. Well, now you can grace your recordings with the sweet sound of the EQP-1A3: a genuine, made-in-America Pultec EQ.
Boost, cut, or both – it all sounds great
Take a look at the Pultec EQP-1A3 and you’ll see it’s not designed like your typical equalizer. The two-band design basically gives you flexible low shelving, along with broad-bandwidth midrange peak control. Because the boost and attenuate controls work independently you can use an old trick to add weight to the bass region while also notching a bit above the cutoff point, by boosting and attenuating at the same time (try it on kick drum and you’ll never look back). On the high-frequency side, you can set separate ranges for the boost and attenuation. Said another way, you can boost at 12kHz and cut at 5k, adding “air” to a track without increasing presence.
Pultec EQP-1A3 Two-band Equalizer Features
Pultec is back and better than ever with the EQP-1A3!
Tech Specs
교환과 반품은 어떻게 하나요 ?
제품을 뜯으시면 ! 교환 및 반품이 불가능합니다.
개봉을 하시기 전에 꼭 ! 반품을 하실 것인지 안 할 것인지 고민해보시고 뜯어주세요.
반품 시에는 받으셨던 겉포장 그대로 포장해서 보내주세요.
겉 포장이 파손되었을 경우에는 별도로 포장을 해서 보내주셔야 해요 ~
반품을 하실 경우 왕복 배송비를 부담해주셔야 합니다.
만약 구매하실 때 배송비를 리버브에서 부담했을 시에도 제품 배송비가 3000원이 들었다면
반품 시에는 6000원을 리버브 계좌로 금액을 이체해주셔야 합니다.
또 다른 예로 만약 커다란 택배의 경우 << 스피커와 같은
5000원 배송비가 드는 제품이었다면 반품시에는
왕복 5000+5000원 = 1만원의 배송비를 리버브의 계좌로 이체해주셔야 합니다.
신한은행 140-012-738392 (주)이퀄라이져 곽기호 로 보내주시면 됩니다.
그리고 리버브에 반품 요청 연락을 주세요 !!!
전화번호 : 02-6358-1004~6 (평일 11:00~18:00, 토, 일, 공휴일 휴무)
이메일 : ask@reverb.co.kr
Q&A 게시판 글 작성 또한 좋습니다.
제품이 불량입니다 !
제품 교환을 하고 싶습니다. 어떻게 해야하나요 ?
제품이 사자마자 고장인 경우 (제품 수령 후 7일이내) = 초도불량일 경우에는
초도 불량인지 확인 절차가 필요합니다.
리버브로 연락주시면 원격 지원으로 먼저 도움을 드리고 !
고장 의심이 확정되면 리버브로 물건을 보내주세요.
배송비를 리버브에서 부담합니다.
테스트 후에 수입사,제조사별 메뉴얼에 따라 AS 진행됩니다
제품을 사용하다가 고장이 난 것 같아요. 어떻게 해야하나요 ?
리버브에서 취급하는 전제품은 에프터 서비스가 가능한 정식 수입 제품들입니다.
보증기간 만료 이전 제품은 수입사, 제조사별 메뉴얼에 따라 AS진행됩니다
사용자의 과실 또는 보증기간 이후 제품 고장일 경우 수리비가 발생할 수 있습니다.
수리 이전에 수리비 책정이 이루어지며 고객님과의 의사소통이후 진행됩니다.
교환/반품이 불가능한 경우
- 상품 겉 포장이 파손 또는 개봉되었을 경우
- 소프트웨어의 경우 시리얼넘버를 확인하였거나 타인에게 공개되었을 가능성이 있는 경우
- 상품의 TAG, 스티커, 비닐포장 등을 훼손 및 멸실할 경우
리버브로 교환요청 혹은 에프터 서비스를 위해서 연락을 주세요 !!!
전화번호 : 02-6358-1004~6 (평일 11:00~18:00, 토, 일, 공휴일 휴무)
카카오톡 : ableton
이메일 : ask@reverb.co.kr
Q&A 게시판 글 작성 또한 좋습니다.
Pultec EQP-1A3